EBX-Man
04-30 02:31 PM
Hi,
I am lost trying to find information on this.
Here's the situation for adding my wife to my I-485 application (we are from India). We DO have her 100% correct birth certificate we got issued last month.
However, since the issue date on it is April 2011, our lawyer insists that we need affidavits from her parents as well (perhaps to avoid RFEs). Further the lawyer insists that the Foreign Affairs Manual for India states that these be sworn in front of a first class magistrate of India.
When her parents went to the local court and request the first class magistrate, the court officer is demanding that we have a sealed copy of the requesting authority (USCIS) that clearly states that a first class magistrate's signature is required!
Questions:
(i) Is the affidavit supposed to be sworn in front of first class magistrate? Even if we have a corrected birth certificate?? Or can it be signed by an 'Executive Magistrate' or maybe even just notarized??
(ii) If yes, did someone else face a similar issue?
(iii) If yes, is there a USCIS document I could send to satisfy their demand?
I did try to find a USCIS document but all it states is that ... IF the birth certificate is unavailable ... then "sworn affidavits" need to accompany non-availability certificate from a competent local government authority.
Please advise :(
PS: FYI, they went to the Palghar court in Maharashtra, India.
The rule is
If you dont have a birth certificate
- You need affidavites from both parents
If you have a birth certificate issued after 1 year of date of birth
- You need affidavites from both parents
If you have a birth certificate issued within 1 year of date of birth
- You do not need affidavites
Dont worry i applied for birth certificate in 2005 in india and submitted that along with affidavites from parents and the documents were accepted
I am lost trying to find information on this.
Here's the situation for adding my wife to my I-485 application (we are from India). We DO have her 100% correct birth certificate we got issued last month.
However, since the issue date on it is April 2011, our lawyer insists that we need affidavits from her parents as well (perhaps to avoid RFEs). Further the lawyer insists that the Foreign Affairs Manual for India states that these be sworn in front of a first class magistrate of India.
When her parents went to the local court and request the first class magistrate, the court officer is demanding that we have a sealed copy of the requesting authority (USCIS) that clearly states that a first class magistrate's signature is required!
Questions:
(i) Is the affidavit supposed to be sworn in front of first class magistrate? Even if we have a corrected birth certificate?? Or can it be signed by an 'Executive Magistrate' or maybe even just notarized??
(ii) If yes, did someone else face a similar issue?
(iii) If yes, is there a USCIS document I could send to satisfy their demand?
I did try to find a USCIS document but all it states is that ... IF the birth certificate is unavailable ... then "sworn affidavits" need to accompany non-availability certificate from a competent local government authority.
Please advise :(
PS: FYI, they went to the Palghar court in Maharashtra, India.
The rule is
If you dont have a birth certificate
- You need affidavites from both parents
If you have a birth certificate issued after 1 year of date of birth
- You need affidavites from both parents
If you have a birth certificate issued within 1 year of date of birth
- You do not need affidavites
Dont worry i applied for birth certificate in 2005 in india and submitted that along with affidavites from parents and the documents were accepted
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
prioritydate
08-13 12:31 AM
When India won its first Olympics individual medal, someone posted it on this site. People descended on that poor guy asking him to stick to the subject. Now where are those guys? Do I need to assume that they are not offended by this time?
.jpg "latest wallpapers of john abraham. John Abraham; John Abraham. jav6454. Aug 19, 09:45 AM. Great, more ways of telling the world where you are.")
ahaadi
07-10 09:28 PM
In case his I-140 was approved then there are no problems for this scenario right?
more...
vin13
09-30 03:37 PM
If your last FP was more than 15 months ago, then write to local congressman, that usually works.
But would you get a notice or RFE or something like that....I am asking because i am my spouse both have recieved RFE's today....so wanted to assume something till we get the actual mail.
But would you get a notice or RFE or something like that....I am asking because i am my spouse both have recieved RFE's today....so wanted to assume something till we get the actual mail.
dogking
08-14 02:56 PM
there is always risk. If the PERM is denied, the RIR will be denied as well, that is the procedure for conversion cases. You can re-file 6 months later.
I just had my PERM filed. My job hasn't changed and I have 2 years left. My lawyer said it's worth to try. Now I have my finger crossed.
rb_248, after you filed the conversion how long for you to got it approved?
I just had my PERM filed. My job hasn't changed and I have 2 years left. My lawyer said it's worth to try. Now I have my finger crossed.
rb_248, after you filed the conversion how long for you to got it approved?
more...
.jpg "latest wallpaper of john abraham. Wallpapers: John Abraham; Wallpapers: John Abraham. leekohler. Apr 15, 07:50 AM. People didn#39;t seem to care about the")
magician7989
09-05 05:00 PM
Anybody going to the DC Rally. We really need to lobby for change in the immigrations system. Immigrants inject a lot of wealth of capital and wealth in the US.
Berkeleybee
05-30 03:53 PM
I think what Asian means is that the stringent rule of 'Same kind of job' in AC21 makes AC21 usability very limited. If that condition is abolished, 485 is as good as GC in terms of job mobility.
Unfortunately that doesn't have a lot of support since it defeats the purpose of labor certification.
Unfortunately that doesn't have a lot of support since it defeats the purpose of labor certification.
more...
GCaspirations
09-21 10:39 PM
My case was also transferred to CSC. The transfer notice has a different receipt date than the receipt notice. MY case is now transferred back to NSC.
I would like to know if anybody of you have received finger print notice. I have not received it yet.
I would like to know if anybody of you have received finger print notice. I have not received it yet.
piyush77
03-24 07:54 PM
I am having similar problem, I have my I-140 approved in 2007 485 filed in july 2007. I got laid off, now I want to change job with project manager title. is it safe to do that but my core technical knowledge will be same as before in the job description.
more...
priderock
08-16 12:29 PM
yes it will be funny if any of Exceed employee working in backlog center is also affcted by backlog of his labor application there.
If there are any, they must have talked to some one and got it approved by now, because there is no order in approvals any way... :)
If there are any, they must have talked to some one and got it approved by now, because there is no order in approvals any way... :)
bsbawa10
08-15 07:06 AM
How to add an enty?
it does not let me.
Try it now
it does not let me.
Try it now
more...
eb3_nepa
02-18 11:17 AM
Your reasoning is nearly correct. But you are missing Two points:
1. There will be some cases from BECs which could not file AOSs in time since their labors did not clear for them in the july/aug timeframe. Only when these have cleared will the chances of further retrogression decrease.
2. ALSO - Just as an example, If there are 100000 Eb2s with PDs of 2005. We know that there are NOT 10000 visa #s available for EB2s, in that case too, the dates will retrogress - since thats the only way they can prevent visa #s being used.
Am I making much sense ?
My point here is:
Now there is NO reason for the DOS to miscalculate or not know how many applications are out there for AOS.
Someone mentioned that some BEC ppl were not able to apply for AOS coz their applications did not get released in time, that is a valid point. So maybe we should see one last backward movement if any and then it should be strictly forward movement. VERY SLOW movement i agree but forward movement.
1. There will be some cases from BECs which could not file AOSs in time since their labors did not clear for them in the july/aug timeframe. Only when these have cleared will the chances of further retrogression decrease.
2. ALSO - Just as an example, If there are 100000 Eb2s with PDs of 2005. We know that there are NOT 10000 visa #s available for EB2s, in that case too, the dates will retrogress - since thats the only way they can prevent visa #s being used.
Am I making much sense ?
My point here is:
Now there is NO reason for the DOS to miscalculate or not know how many applications are out there for AOS.
Someone mentioned that some BEC ppl were not able to apply for AOS coz their applications did not get released in time, that is a valid point. So maybe we should see one last backward movement if any and then it should be strictly forward movement. VERY SLOW movement i agree but forward movement.
pappu
12-05 12:22 PM
If anyone stuck in greencards namechecks wants to contact ACLU about it to include GC namecheck issue in it, they can do so.
Here are the contact details:
NADINE STROSSEN1
President of the ACLU
nstrossen@nyls.edu
===================
Their general feedback form
http://www.aclu.org/contact/general/index.html
============
You can search for your local ACLU contact:
http://www.aclu.org/affiliates/
ACLU Immigrants rights project E-mail - immrights@aclu.org
Here are the contact details:
NADINE STROSSEN1
President of the ACLU
nstrossen@nyls.edu
===================
Their general feedback form
http://www.aclu.org/contact/general/index.html
============
You can search for your local ACLU contact:
http://www.aclu.org/affiliates/
ACLU Immigrants rights project E-mail - immrights@aclu.org
more...
rahul2699
05-19 11:13 AM
My H1B expired, and they are now just working on the labor certification process, so I have left the country and working outside the US. Someone did tell me that after I have been out for a 12 month period they may get me back under a new H1B. Is this correct? Reason I ask is that I have been out of the US for 4 months, and they seem to be working very slow on my Labor Cert, and I know once the this is submitted I have to wait a further 12 months, so wanted to see if it is viable to get a new H1B. Any thoughts would be appreciated.
Yes if you live out of US for at least a year after the full H-1B term, you can apply for a new H-1B. If i were you, i'll keep the labor process going while applying for a new H-1 because GC is for future employment and if anything you can retain the priority date...
Yes if you live out of US for at least a year after the full H-1B term, you can apply for a new H-1B. If i were you, i'll keep the labor process going while applying for a new H-1 because GC is for future employment and if anything you can retain the priority date...
kiru_99
10-30 03:22 PM
I don't know what amt was enclosed with the application. All I know it is rejected b'couse of Incorrect/No Fee. My concern is it was rejected on Sep 22nd & lawyer might have got the notice of rejection & he missed it or don't know what happened. It is already more than a month now. How much time is there to resend the application.
Thanks
-Kiru
Thanks
-Kiru
more...
mytv
08-17 11:59 AM
See as my H4 was getting over on Aug 1st and i was turning 21 .AS you all know once we complete 21 yrs we are no more dependent .so i applied my f1 in april and it got approved in aug. My dad got his 1-140 approved 7 months ago and he applied our all's i-485 on july 2nd 2007. so i just wanna know is there any problem ?will i get my green card??
plz help me
lawyers saw it is not a problem .But all know how lawyers are...
plz help me
lawyers saw it is not a problem .But all know how lawyers are...
chanduv23
02-14 04:39 PM
This is awesome. I wish I went to Medical school like most of my cousins..too late now
I wished too :), though i am happy helping Paskal in his efforts now :)
I wished too :), though i am happy helping Paskal in his efforts now :)
chehuan
01-17 04:26 PM
hey
i wanted to know what are the chances of a persons i40 to be denied if another with the same profile in the same team and same application is recently denied
for your information both are masters candidates and are eb2 filed
but his was file months before mine and he got audited
mine is in the process of being filed
not sure of whether this even matters and cases are indepedent
but just wanted to know ahead of time if it calls for a sure denial
thanks
chehuan
i wanted to know what are the chances of a persons i40 to be denied if another with the same profile in the same team and same application is recently denied
for your information both are masters candidates and are eb2 filed
but his was file months before mine and he got audited
mine is in the process of being filed
not sure of whether this even matters and cases are indepedent
but just wanted to know ahead of time if it calls for a sure denial
thanks
chehuan
hojo
09-05 09:32 PM
very nice footer lostinbeta, original and clean, looks great
drak70
04-09 05:27 PM
This one was posted originally at http://immigrationvoice.org/forum/archive/index.php/t-20450.html. Just replace USVI with Hawaii.
My friends took a vacation is US VI and they have full inspections there.YOu better have your documents with you in person
http://www.usvi.net/us-ins/html/2travel_back_....html
Traveling Back to Puerto Rico and the Continental United States
Due to the location of the territory, the United States Virgin Islands has a pre-clearance inspection process for all flights from the territory to destinations in Puerto Rico or the Continental United States.
.
My friends took a vacation is US VI and they have full inspections there.YOu better have your documents with you in person
http://www.usvi.net/us-ins/html/2travel_back_....html
Traveling Back to Puerto Rico and the Continental United States
Due to the location of the territory, the United States Virgin Islands has a pre-clearance inspection process for all flights from the territory to destinations in Puerto Rico or the Continental United States.
.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น